Common Connection Methods for Rheostats

A rheostat is a common electronic component. In practical applications, rheostats are usually combined with other electronic components such as capacitors, inductors, diodes, etc. to form various different circuits. This article will provide a detailed introduction to several common methods of connecting rheostats.

A potentiometer is a special type of rheostat that can be used to adjust the voltage or current in a circuit. Potentiometers usually have three pins, one is the middle pin and the other is the port pin. The middle pin is connected to the position that must be adjusted in the circuit, and the port pin is connected to both sides of the power supply.

Potentiometers can be connected in two ways: voltage separation and current separation. In the voltage divider connection, the pins of the two ports of the potentiometer are connected to both sides of the power supply, and the middle pin is connected to the position that must be adjusted. In the current separation connection, the pins of the two ports of the potentiometer are connected to both sides of the power supply, and the middle pin is connected to the load in the circuit.

Serial connection is the process of connecting multiple varistors in a certain order to form a resistance chain. Series connection can increase the resistance value of the power supply and can also be used to divide the voltage in the circuit.

In a series connection, the two port pins of the rheostat are connected to both sides of the power supply, while the middle pin is connected to the port pin of the next rheostat. In series connection, it should be noted that the resistance value of each rheostat should be the same or similar to ensure uniform distribution of current in the circuit.

Parallel connection refers to the simultaneous connection of multiple rheostats into a circuit, forming a parallel circuit. Connecting can reduce the resistance value of the power supply and can also be used to separate the current in the circuit.

In parallel connection, the two port pins of the rheostat are connected to both sides of the power supply, while the middle pin is connected to the port pin of the next rheostat. During the connection process, it should be noted that the resistance value of each rheostat should be the same or similar to ensure uniform voltage distribution in the circuit.

Three terminal connection is the process of connecting the two port pins of a rheostat to both sides of the power supply, while the middle pin is connected to an external circuit. Three terminal connections are usually used for sensors and circuit controllers, and can be used to check changes in physical quantities or control components in circuits.

If you have any purchasing needs for electronic components, please feel free to contact Chengyexing

Shenzhen electronic component IC chip supplier, one-stop BOM distribution company;

Can provide various electronic components (resistors, capacitors, inductors, switch connectors) for integrated circuit IC chips

If you cannot find the model you need, please contact us Chengyexing Company directly. The 50+purchasing team will be responsible for your needs and let us know the rest.

Service hotline: 134-3440-1267, 155-2178-1275

QQ: 2885509645